The FA927S is a full-high, half length, PCI Express Add-In Card featuring the powerful and efficient Intel@Altera Agilex FPGA. Front IO with 2x QSFP28 sockets, each supporting one 100GbE or 40GbE interface. Two 72 DDR4-2400 ECC memory banks each provide 8GB or 16GB of onboard DDR4-2400 memory (72 bits width). PCIE golden finger support Gen5 x16, also support CXL. System monitoring of temperature, voltage, and current gives developers accurate feedback of power utilization for their designs. This card comes with full-height dual slot front brackets and with optional active heatsink or passive heatsink systems. The card can also select single slot passive heatsink solution depending customer application.
General Description
The FA927S is a full-high, half length, PCI Express Add-In Card featuring the powerful and efficient Intel@Altera Agilex FPGA. Front IO with 2x QSFP28 sockets, each supporting one 100GbE or 40GbE interface. Two 72 DDR4-2400 ECC memory banks each provide 8GB or 16GB of onboard DDR4-2400 memory (72 bits width). PCIE golden finger support Gen5 x16, also support CXL. System monitoring of temperature, voltage, and current gives developers accurate feedback of power utilization for their designs. This card comes with full-height dual slot front brackets and with optional active heatsink or passive heatsink systems. The card can also select single slot passive heatsink solution depending customer application.
Block Diagram
Key Features
Form Factor | Full-high, half length PCIE add in card Size: 111mm X 175mm Dual-slot or single slot |
FPGA Device | Intel Agilex: AGIB027 in F2957 package |
Logic Density | 2.7M Logic Elements |
Host Interface | x16 PCIe Gen5 interface direct to FPGA by golden finger, support CXL An addition x16 PCIe Gen4 connector to host by SlimSAS cable |
Memory | 2x 64bit with ECC DDR4 on board, up to 16GB each, one can be used as HPS DDR4 or FPGA logic DDR4. 2Gbit flash memory for booting FPGA A on board eMMC connect to HPS IO |
QSFP28 cages | 2 QSFP28 cages on front panel |
RJ45 | 1000M Ethernet connect to HPS IO |
Slim SAS | 2 x8 slim SAS connector to extend 4 NVME PCIE X4 SSD |
Cooling | Standard：single slot passive heatsink Optional：dual-slot active heatsink with fans or passive heatsink |
Electrial | On-board power derived from PCIe slot 12V and AUX connector Power dissipation is application dependent |
Environmental | Typical Operating: 0 to 35℃ |
Ordering Code：
FA927S(D/H)(P/A) |
DDR4 memory | D/H | D=16GB DDR4 on board H=32GB DDR4 on board |
cooling | P/A | BLANK: Single slot passive heatsink P=Dual slot passive heatsink A=Dual slot active heatsink |
Contact Information
HangZhou FlySlice Technologies Co., Ltd.
Room 801, ChengGao Building, 300 Lianhui Street, Binjiang District, Hangzhou, China
Tel：(+86) 571-81564213 Email: sales@flyslice.com
