FA728S is prototype verification system based on Intel Stratix 10 GX2800. It comprises the most comprehensive and cost-effective solutions on the market. The board provides a wide range of peripherals and memory interfaces to facilitate the prototype verification. It can work on single or double board with FMC connectors. There is a DDR4 SODIMM connector, 2 FMC connector, 4 60pin 2mm header with shroud on board. It also provides a QSFP connector and a PCI 3.0 x1 or x8 interface.
Key
Features
Form Factor
| 120mm X 291mm
|
FPGA Device | Stratix 10 GX2800
|
Logic Density | 2.8M Logic Cells
|
Host Interface | x1 PCIE3.0 or x8 PCIE 3.0 by FMC
|
Memory | 8GB or 4GB DDR4;
1Gbit FLASH
|
DDR4 | 2133MT/s @ 8GB or 4GB
|
I/O | QSFP 40Gbps x1
PCIE 3.0 x1
Dual FPGA mezzanine card (FMC)expansion headers
1x Micro USB
4x60pin 2mm expansion headers
1x24pin 2mm expansion headers
1 channel XVCR by SMA
|
Device Configuration | 1. On-Board USB blaster by Micro
USB
2. On-Board Flash memory
|
Clock | Up to 10 clock on board
A different SMA external CLK input
|
Environmental | Typical Operating: 0 to 40 ℃ Storage: -20 to 80 ℃ |
Ordering
Code
F728S(D)
|
DDR4 SODIMM
| D
| Blank=4G DDR4 SODIMM
/D=8G DDR4 SODIMM
|
Contact Information
HangZhou FlySlice Technologies Co., Ltd.
Room 801, ChengGao Building, 300 Lianhui Street, Binjiang District, Hangzhou, China
Tel：(+86) 571-81564213
Email: sales@flyslice.com
